 |
|
| Furnaces
: |
Our
range of industrial furnaces
can be availed at various
range at competitive prices.
These industrial furnaces
are used for All Heat Treatment
Applications such as Pre-heating,
Tempering,Hardening, Mar Tempering
Stress Relieving, Annealing,
Normalising,Gas Carburising, Gas Nitriding,
Bright Annealing, Vacuum Annealing,
Sintering, Tiles Printing,
Non-Ferrous Melting,Gold Melting,
Soldering, Glass Fusing, Stove
Enamelling,Laboratory and
High Temperature Applications
upto1500° C. |
|
|
| Rotary
Retort Furnaces
(Electrically Heated
/ Gas Fired ) |
|
|
|
Electrically
heating tilting type rotary
furnaces offered by Pyrotherm engineers can be used
for hardening and tempering
of various items, such
as screws, nuts, chain
links, springs, bearings
races, needle, balls,
etc. These furnaces are
also used for normalizing,
soft annealing and stress
relieving of carious components.
They are good for gas carburising
and carbonitriding of
mass produced components
of all kinds, such as
gudgeon pins, arbors,
studs, rollers, bicycle
and motor vehicle components,
sewing machine, typewriter
components, mass produced
construction items, etc.
The
rotary report furnaces are widely used for components
that remain unchanged
by revolving movement
of the report. A complete
rotary retort furnace
installation generally
comprises of following
items: rotary retort furnace,
quenching unit for water/oil
or both as per the requirement
of heat treatment process.
|
Carburising,
Hardening, Carbonitriding,
|
|
Ceramic
fibre module with
ceramic vacuum boarding
lining. |
|
Low
voltage transformer
with Nichrome 80/20
strip type heating
elements |
|
|
|
|
| Pit
Type Gas Carburising
Furnaces ( GCF ) (Electrically
Heated ) |
|
|
|
|
Carburising,
Hardening, Carbonitriding,
|
|
Ceramic fibre
module lined furnace |
|
Nichrome
80/20 strip type Heating
elements |
|
No water
cooling for fan & shaft
retort. |
|
|
|
Pit
Type Gas Carburising
Furnaces ( GCF )
(Gas Fired) |
|
|
|
|
|
Carburising,
Hardening, Carbonitriding,
|
|
Ceramic fibre
module lined furnace |
|
Indian /
Imported gas burner |
|
No water
cooling for fan & shaft
retort. |
|
|
|
| Pit
Type Aluminium Sloution
treatment / Temperature
Furnace |
|
|
|
|
Ceramic
fibre module lined furnace |
|
SS-304 Baffle,
high capacity recirculating
fan for temperature uniformity
+/- 5 Deg C |
|
Strip type
heating elements with SS-310
hooks |
|
|
|
Aluminium
Melting / Holding
Furnaces
(
Electrically heated
/ Gas / Oil fired
) |
|
|
|
|
Ceramic
fibre module with IS-8 grooved
bricks. |
|
Nichrome
coil type heating elements
with spare heating elements |
|
Insulated
door, furance shell double
wall construction with air
gap. |
|
|
|
|
|
High quality
heat resistant cast shaker
hearth plate |
|
Ceramic
fibre module lined furnace |
|
Low voltage
transformer with nichrome
strip type heating elements |
|
|
|
| Bogie
Hearth Furnace (
Electrically heated)
|
|
|
|
|
Ceramic
fibre module lined furnace |
|
Heavy bogie
with wheel, rails |
|
Strip type
heating element |
|
|
|
| Bogie
Hearth Furnace (
Oil / Gas Fired) |
|
|
|
|
Ceramic
fibre module lined furnace |
|
North America
type burner |
|
Heavy bogie
with wheels, rails |
|
|
|
| Mesh
belt Brazing Furnace |
|
|
|
|
Inconel-600
muffle and mesh belt |
|
Operating
temperature 1150 Deg C |
|
Ammonia gas
cracker unit |
|
Kanthal A-1
wire elements on high Alumina
tubes. |
|
|
| |
|
|
|
|
|
